Download the program in the Third Announcement (Last updated: December 6, 2013)
| 7h30 – 8h00 | Welcome coffee at the lower ground floor (RB) of Platforms in CEC building |  |
|
Amphitheater 4
|
|
| 8h00 | Opening ceremony Welcome words: Lech Pawlowski & Robert Vassen, invited of Municipality, University, Faculty, ENSCI, SPCTS |
| 8h30 | Plenary lecture: Dr. Michael Höhle / Dr. Malko Gindrat, Innovative Thermal Spray Solutions for Future Challenges |
|
Amphitheater 4
|
|
|
Spray process — session 1
Chairman: Lech Pawlowski |
|
| 9h00 | Comprehensive development of thermal spray concepts. Prof. Bernhard Wielage / Prof. Thomas Lampke – Technical University of Chemnitz (Germany) |
| 9h30 | Ultra high pressure HVOF gun fueled with ethanol for carbides spraying. Frantisek Zahalka |
| 9h50 | Interface reaction mechanism for Al coating sealed with thermal diffusion of Zn. Timing Zhang |
| 10h10 | Technological Developments in Nozzle Design for Twin Wire Arc Spraying to Improve the Variety of Application. Leif Gereon Hagen |
|
Amphitheater 3
|
|
|
Cold spray — session 1
Chairman: Thomas Klassen |
|
| 9h00 | Cold Spraying: From process fundamentals towards advanced applications. Prof. Igor Smurov – ENISE (France) |
| 9h30 | Investigation on the Effect of Addition of Ni3Al Particulates on the Mechanical Properties of Cold Sprayed Nickel. Tharaka Chandanayaka |
| 9h50 | The effect of substrate preparation on the mechanical properties of coatings deposited by low-pressure cold spraying. Pawel Sokolowski |
| 10h10 | Oxidation performance of cold sprayed Ti-Al barriers on γ-TiAl intermetallic substrates. Jan Cizek |
|
Salle TD 3
|
|
|
Applications of coatings — session 1
Chairman: Bernhard Wielage |
|
| 9h00 | Bioglass, bioceramic and composite coatings for biomedical applications. Prof. Valeria Cannillo – University of Modena (Italy) |
| 9h30 | Investigation of HVOF-Sprayed Hardmetal Coatings for Static Friction Applications. Lutz-Michael Berger |
| 9h50 | Steel coating application for engine block bores by Plasma Transferred Wire Arc spraying process. Geoffrey Darut |
| 10h10 | Recent Developments in High Velocity Suspension Flame Spraying and Industrial Applications. Priv.-Doz. Andreas Killinger / Prof. Rainer Gadow – University of Stuttgart (Germany) |
| 10h40 – 11h20 | Coffee break at the lower ground floor (RB) of Platforms in CEC building | |
|
Amphitheater 4
|
|
|
Nanotechnology — session 1
Chairwoman: Armelle Vardelle |
|
| 11h20 | Novel Opportunities for Thermal Spray by PS-PVD. Dr. Georg Mauer – Forschungszentrum Jülich (Germany) |
| 11h50 | Helium Substitution in liquid feedstock plasma spraying. Aurélien Joulia |
| 12h10 | On Experiments with Liquid Feedstock Spraying with Water Stabilized Plasma Torch. Radek Musalek |
| 12h30 | Role of suspension processing in the preparation of nano/submicron structured feedstocks for plasma spraying. Prof. Enrique Sánchez – Institute of Ceramic Technology (Spain) |
|
Amphitheater 3
|
|
|
Cold spray — session 2
Chairman: Sergi Dosta |
|
| 11h20 | On Adhesion Mechanisms of Cold Gas Sprayed Aluminium Coatings on Al2O3-Substrates. Dr. Thomas Grund – Chemnitz University of Technology (Germany) |
| 11h50 | Effect of axial carrier gas on particle velocity in cold spraying. Xinkun Suo |
| 12h10 | Effect of Preheating Treatment on the Deposition Mechanism of Cold Sprayed Copper Particles. Shuo Yin |
| 12h30 | A study on the microstructure and tribological behavior of cold-sprayed metal matrix composites reinforced by particulate quasicrystal. Xueping Guo |
|
Salle TD 3
|
|
|
Applications of coatings — session 2
Chairman: Carlos Lima |
|
| 11h20 | Developing alternative coatings for repair and restoration of pumps of caustic liquor transportation in the aluminum and nickel industry. Prof. Carlos Lima – Methodist University of Piracicaba (Bresil) |
| 11h50 | Thermally Sprayed Finestructured WC-12Co Coatings Finished by Ball Burnishing and Grinding as an Innovative Approach to Protect Forming Tools Against Wear. Peter Hollingsworth |
| 12h10 | Bioactivity and Mechanical Properties of Bioactive Glass Coatings Fabricated by Flame Spraying. Monica Monsalve |
| 12h30 | Characterization of microstructure and thermal properties of YCSZ coatings obtained by suspension plasma spraying. Pawel Sokolowski |
| 13h00 – 15h00 | LUNCH in the Forum in “La Coupole” building of ESTER Technopole |  |
|
Amphitheater 4
|
|
| 15h00 | Plenary lecture: Prof. Thomas Klassen, Optimum Parameters for Cold Spraying |
|
Amphitheater 4
|
|
|
Mechanical properties — session 1
Chairman: Eli Puchi Cabrera |
|
| 15h30 | Mechanical properties by indentation of thermal sprayed coatings: Relevance of the scale of measurement. Prof. Didier Chicot – University of Lille 1 (France) |
| 16h00 | Microstructure and sliding wear resistances of as-deposited and annealed high carbone steel coatings obtained by flame spraying. Abdelaziz Ati |
| 16h20 | Microstructure and Tribology of WC-FeCrAl Cermets Deposited by HVOF- and HVAF-Spraying. Giovanni Bolelli |
| 16h40 | Residual stresses and final deformation of an alumina coating: modeling and measurement. Rodolphe Bolot |
| 17h00 | Integrated formation of high performance turbine blade model by SLM and APS technology. Zhenhua Cai |
| 17h20 | Comparative study of the microstructure, microhardness, corrosion, wear and thermal shock resistance of ZrO2-Y2O3, ZrO2-CeO2 and ZrO2-Al2O3 coatings elaborated by atmospheric plasma spraying. Andres G. Gonzalez |
|
Amphitheater 3
|
|
|
Coatings properties — session 1
Chairman: Petri Vuoristo |
|
| 15h30 | Design of Microstructures in Thermal Barrier Coatings. Prof. Per Nylen – University of Trollhättan (Sweden) |
| 16h00 | High temperature oxidation of MCrAlY coatings modified by Al2O3 PVD overlay. Cecilia Bartuli |
| 16h20 | Deposition and Characterization of Thermal Barrier Coatings of ZrO2-4 mol. % Y2O3–1 mol. % Gd2O3–1 mol. % Yb2O3. Lidong Zhao |
| 16h40 | Effect of sealing processing and treatment on the behavior of plasma-sprayed ceramic alumina coating in extreme environment. Angélique Canton |
| 17h00 | Improving surface properties of Mg alloys by cold spray Aluminum based coatings. Juliana Bedoya |
| 17h20 | Investigation of the adherence between enamel coating and base metal by fractal analysis. Tao Han |
|
Salle TD 3
|
|
|
Applications of coatings — session 3
Chairman: Thomas Lampke |
|
| 15h30 | Manufacture of gadolinium zirconate as thermal barrier coating using different types of APS guns. Prof. Robert Vassen – Forschungszentrum Jülich (Germany) |
| 16h00 | Co-plasma spraying of NiCrAlY powder and alumina suspension for anti-wear applications. Alice Ravaux |
| 16h20 | The Use of Detonation Spraying for the Development of Catalytic Converters. Igor Smurov |
|
Modelling — session 1
Chairman: Luca Lusvarghi |
|
| 16h40 | Investigations and 3D representations of Atmospheric and Suspension Plasma Spraying coatings microstructure. J. Marthe |
| 17h00 | Finite element modeling of cracking phenomenon on the interfaces of thermal barrier coatings system as a function of the TGO growth. Joseph Absi |
| 17h20 | Computer-aided trajectory generation strategy and computational thermal history in thermal spraying. Zhenhua Cai |
|
Salle TD 4
|
|
|
Spray process — session 2
Chairman: Jan Cizek |
|
| 15h30 | Sprayability of Ceramic Substrates by Thermal Spraying. Filoftea Laura Toma |
| 16h00 | Grain Growth and Pore Elimination in Inconel 625 Deposited by APS. Fardad Azarmi |
| 16h20 | UHTC by plasma spraying: use of an innovative way to include SiC in coatings. Charlotte Barré |
| 16h40 | Development of oxide-dispersion-strengthened CoNiCrAlY Bondcoats. Francesco Bozza |
| 17h00 | MCrAlY and ZrO2 coatings on Ti-6Al-4V using a non-transferred arc plasma torch with reverse vortex. Felipe Rocha Caliari |
| 17h20 | The Role of Substrate Surface Roughness on Adhesion Properties of APS and HVOF Sprayed Nickel Coatings. Ladislav Celko |
| 17h40 – 17h50 | Coffee break at the lower ground floor (RB) of Platforms in CEC building | |
|
Amphitheater 4
|
|
|
Mechanical properties — session 2
Chairman: Andreas Killinger |
|
| 17h50 | Comparison of mechanical and electrochemical properties of WC-17 and 12Co coatings onto Al7075-T6 obtained by HVOF and CGS. Dr. Sergi Dosta – University of Barcelona (Spain) |
| 18h20 | Effect of cold sprayed Al coating on mechanical property and corrosion behavior of friction stir welded 2024-T351 joint. Wenya Li |
| 18h40 | Drilling resistance test as a method to determine mechanical properties of Al2O3-TiO2 plasma spray coatings. Claudia Constanza Palacio |
|
Amphitheater 3
|
|
|
Coatings properties — session 2
Chairman: Pierre Fauchais |
|
| 17h50 | Properties and performance of coatings deposited by laser cladding and thermal spray technologies – a direct comparison of the deposition technologies. Prof. Petri Vuoristo – Technical University of Tampere (Finland) |
| 18h20 | Properties of NiCrBSi coating, as sprayed and remelted by different technologies. Šárka Houdková |
| 18h40 | Fireside corrosion performance of FeCrAl coating at 700, 750 & 800 °C in simulated coal-biomass combustion environment for USC boilers. Tanvir Hussain |
|
Salle TD 3
|
|
|
Modelling — session 2
Chairman: Ghislain Montavon |
|
| 17h50 | The usefulness of mathematical models in plasma spraying engineering. Prof. Armelle Vardelle – University of Limoges (France) |
| 18h20 | Modeling of radiative exchanges between plasma jet and colloidal droplets in Suspension Plasma Spray. Florent Girard |
| 18h40 | Comparison between Two-Dimensional and Three-Dimensional Models on Plasma Torch Simulations. Zhiwei Guo |
|
Salle TD 4
|
|
|
Spray process — session 3
Chairman: Igor Smurov |
|
| 17h50 | Effect of Bond Coat Surface Roughness on the Structure of Axial Suspension Plasma Spray Thermal Barrier Coatings. Nicholas Curry |
| 18h20 | Microstructure and wear resistance of FeAl/Al2O3 intermetallic composite coating prepared by atmospheric plasma spraying. Bo Song |
| 19h10 | Poster session at the lower ground floor (RB) of Platforms in CEC building | |
| 20h00 | Gala dinner in “Le Poudrier” (Bus from ESTER Technopole to “Le Poudrier”) |
 |
Last updated: December 6, 2013