Download the program in the Third Announcement (Last updated: December 6, 2013)
| 8h00 – 8h30 | Welcome coffee at the lower ground floor (RB) of Platforms in CEC building |  |
|
Amphitheater 4
|
|
| 8h30 | Plenary lecture: Prof. Pierre Fauchais, Evolution, from the seventies to now of the understanding of plasma spraying at the University of Limoges |
|
Amphitheater 4
|
|
|
Mechanical properties — session 3
Chairman: Enrique Sánchez |
|
| 9h00 | Tribological Properties of Thermal Spray Coatings. Dr. Luca Lusvarghi – University of Modena (Italy) |
| 9h30 | Tribo-corrosion behaviour of chromium carbide based coatings deposited by HVOF. R. Pileggi |
| 9h50 | Microstructure and Tribological Properties of Plasma Sprayed Nanostructured and Conventional Alumina-Titania Coatings. Wojciech Zorawski |
| 10h10 | Understanding the mechanisms produced during rotary drilling test of ceramic thermal spray coatings: An alternative to determine the mechanical resistance of these coatings. Fabio Vargas |
|
Amphitheater 3
|
|
|
Coatings properties — session 3
Chairman: Per Nylen |
|
| 9h00 | Suspension Plasma Spraying to reach enhanced coating properties. Dr. Luc Bianchi – CEA (France) |
| 9h30 | The effect of samarium oxide on electrical conductivity of plasma sprayed SOFC anode. S.N. Panahi |
| 9h50 | Optical properties of Al/Al2O3 cermets obtained by plasma spraying: role of composition and microstructure. Denis Toru |
| 10h10 | Effect of material combination of matrix and reinforcement on characterization of cold sprayed composite coatings. Min Yu |
|
Salle TD 3
|
|
|
Modelling — session 3
Chairman: Giovanni Bolelli |
|
| 9h00 | Process prediction / control implementing artificial intelligence methods and numerical modeling, in particular for robot trajectories. Prof. Ghislain Montavon – University of Belfort Montbéliard (France) |
| 9h30 | Numerical simulation of several YSZ impacts on a stainless steel substrate under ArH2 plasma spray conditions. Frédéric Sarret |
|
Spray process — session 4
Chairman: Robert Vassen |
|
| 9h50 | The Influence of Substrate Temperature on Properties of APS and VPS W Coatings. Ondrej Kovářík |
| 10h10 | Correlation of Powder Feeding Parameters and Properties of Plasma Sprayed Alumina Coatings Evaluated With a New Camera Diagnostic System. Ville Matikainen |
| 10h50 – 11h10 | Coffee break at the lower ground floor (RB) of Platforms in CEC building | |
|
Amphitheater 4
|
|
|
Nanotechnology — session 2
Chairman: Alain Denoirjean |
|
| 11h10 | Thermal spraying with Suspensions – combining technical Performance and Economics. Dr. Michael Berger – Fraunhofer Institute (Germany) |
| 11h40 | A dimensionless approach to studying submicron particle impact. Guillaume Bidron |
| 12h00 | Graded Nanocomposite Ceramic Coatings fabricated from conventional coarse grained powder. Tomas Chraska |
| 12h20 | Zirconium field electron emitters on template from suspension plasma sprayed bioactive glass coatings with acicular microstructures. Zbigniew Znamirowski |
|
Amphitheater 3
|
|
|
Coatings properties — session 4
Chairman: Mario Tului |
|
| 11h10 | In-situ Monitoring of Cracking in Ceramic Coatings during Plasma Spraying by Using AE Signals. Prof. Seiji Kuroda / Dr. Kaita Ito – NIMS / University of Tokyo (Japan) |
| 11h40 | Effect of the initial particles size distribution on the properties of suspension plasma sprayed Al2O3-TiO2 coatings. Mónica Vicent |
| 12h00 | On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits. Jan Vit |
| 12h20 | Detailed Microstructural Characterization of HPCS Ni and NiCu Coatings. Heli Koivuluoto |
| 12h40 | Numerical and experimental analysis of copper particles velocity in low pressure cold spraying process. Aleksandra Malachowska |
|
Salle TD 3
|
|
|
Spray process — session 5
Chairman: Hanlin Liao |
|
| 11h10 | Optimization of WC-based HVAF-sprayed Coatings for Alternative to Electrolytic Hard Chromium: Respective Role of Binder and Carbides Grain Size on Coating Wear and Corrosion Properties. Christophe Lyphout |
| 11h40 | Thermal kinetics in slag flame spraying for making hollow vitreous and semicrystalline microspheres. Thierry Poirier |
| 12h00 | Influence of the Handling Parameters on the Formation of Residual Stresses During HVOF-Spraying of Fine WC-12Co Powders. Peter Hollingsworth |
| 12h20 | Deposition of NiCrBSi coatings by atmospheric plasma spray and dry-ice blasting: microstructure and wear resistance. Shujuan Dong |
| 13h00 – 15h00 | LUNCH in the Forum in “La Coupole” building of ESTER Technopole End of 6th RIPT |
 |
Last updated: December 6, 2013